IT 
EN 
Kit MultiVan M
The kit consists of the following items. Click to view them.
Recommended retail price € 8.600 including VAT
n° 1 - "Zoned" Floor
"Zoned" Floor
The "Zoned" Floor is suitable for vehicles where the removal of passenger seats is expected.
The "Zoned" Floor is suitable for vehicles where the removal of passenger seats is expected.
It is divided into zones that correspond to: trunk area, 2nd row seat area, and 1st row seat area. It is possible to keep one or two rows of seats by removing only the corresponding floor zone and leaving the rear zone intact.
Each zone can be further subdivided when the rows have seats that can be managed independently (e.g., 2 connected seats + 1 independent seat).
-
n° 1 - Bed Structure for Multivan
Bed Structure
Structure serving as support for the "Longitudinal Bed"
Structure serving as support for the "Longitudinal Bed".
Incorporates a foldable shelf for an induction plate.
Replaces the "Wheel Arch Modules" when these cannot be used.
Either because the wheel arches are covered by linings or because there is no space for the structure.
n° 1 - Longitudinal bed
Longitudinal Bed
Fully removable longitudinal bed, double-sized.
- A fully removable longitudinal bed, double-sized. Includes mattress. With a structure anchored to the 'Wheel Arch Modules' or the 'Bed Frame'. Suitable for vehicles that do NOT have sufficient internal width to ensure the proper length of the bed. The bed thus develops longitudinally.
n° 6 - Low Module 40
Low Module 40
Module measuring 40 x 50 x 42.2 (D x W x H)
- A generic module measuring 40 x 50 x 42.2 (D x W x H), suitable for storing and making common items available: It can become a specific module: toilet, sink, stove if integrated with the corresponding 'smart elements'. Designed to also serve as a seat and table. Engineered to be movable, stackable, and internally connectable.
n° 1 - Smart Sink - Module 40
Smart Sink - Module 40
Elements for transforming Module 40 from generic to sink.
- Elements for transforming Module 40 from generic to sink. Includes: support frames, stainless steel basin with a depth of 100 mm, drain, drain pipe, and grey water tank. You can opt for the version without the pipe and tank to avoid the tank taking up space inside the module. The Smart Sink can be used on a single module or on modules with a Double smart element. The grey water tank will be sized based on 'The Cobra' (removable water system, 10 - 25 or 50 liters). In the single module, the 12-liter tank is used, while in modules with Double Smart, up to 2 25-liter tanks can be used.
n° 1 - Water System - 10
Water System 10
Removable water system for the distribution of water both inside and outside the vehicle.
- Removable water system for the distribution of water both inside and outside the vehicle. Includes 10-liter tank, pump with membrane switch (pressure switch), electrical cable and 3-meter hose, showerhead.
